home *** CD-ROM | disk | FTP | other *** search
- /*************************************************
- * Unicode Property Table handler *
- *************************************************/
-
- #ifndef _UCPINTERNAL_H
- #define _UCPINTERNAL_H
-
- /* Internal header file defining the layout of the bits in each pair of 32-bit
- words that form a data item in the table. */
-
- typedef struct cnode {
- pcre_uint32 f0;
- pcre_uint32 f1;
- } cnode;
-
- /* Things for the f0 field */
-
- #define f0_scriptmask 0xff000000 /* Mask for script field */
- #define f0_scriptshift 24 /* Shift for script value */
- #define f0_rangeflag 0x00f00000 /* Flag for a range item */
- #define f0_charmask 0x001fffff /* Mask for code point value */
-
- /* Things for the f1 field */
-
- #define f1_typemask 0xfc000000 /* Mask for char type field */
- #define f1_typeshift 26 /* Shift for the type field */
- #define f1_rangemask 0x0000ffff /* Mask for a range offset */
- #define f1_casemask 0x0000ffff /* Mask for a case offset */
- #define f1_caseneg 0xffff8000 /* Bits for negation */
-
- /* The data consists of a vector of structures of type cnode. The two unsigned
- 32-bit integers are used as follows:
-
- (f0) (1) The most significant byte holds the script number. The numbers are
- defined by the enum in ucp.h.
-
- (2) The 0x00800000 bit is set if this entry defines a range of characters.
- It is not set if this entry defines a single character
-
- (3) The 0x00600000 bits are spare.
-
- (4) The 0x001fffff bits contain the code point. No Unicode code point will
- ever be greater than 0x0010ffff, so this should be OK for ever.
-
- (f1) (1) The 0xfc000000 bits contain the character type number. The numbers are
- defined by an enum in ucp.h.
-
- (2) The 0x03ff0000 bits are spare.
-
- (3) The 0x0000ffff bits contain EITHER the unsigned offset to the top of
- range if this entry defines a range, OR the *signed* offset to the
- character's "other case" partner if this entry defines a single
- character. There is no partner if the value is zero.
-
- -------------------------------------------------------------------------------
- | script (8) |.|.|.| codepoint (21) || type (6) |.|.| spare (8) | offset (16) |
- -------------------------------------------------------------------------------
- | | | | |
- | | |-> spare | |-> spare
- | | |
- | |-> spare |-> spare
- |
- |-> range flag
-
- The upper/lower casing information is set only for characters that come in
- pairs. The non-one-to-one mappings in the Unicode data are ignored.
-
- When searching the data, proceed as follows:
-
- (1) Set up for a binary chop search.
-
- (2) If the top is not greater than the bottom, the character is not in the
- table. Its type must therefore be "Cn" ("Undefined").
-
- (3) Find the middle vector element.
-
- (4) Extract the code point and compare. If equal, we are done.
-
- (5) If the test character is smaller, set the top to the current point, and
- goto (2).
-
- (6) If the current entry defines a range, compute the last character by adding
- the offset, and see if the test character is within the range. If it is,
- we are done.
-
- (7) Otherwise, set the bottom to one element past the current point and goto
- (2).
- */
-
- #endif /* _UCPINTERNAL_H */
-
- /* End of ucpinternal.h */
-